| Date of introduction |
November 2011 |
| Type |
Integrated DS player, pre-amplifier and power amplifier |
| Dimensions |
(H) 80 mm x (W) 381 mm x (D) 355 mm
(H) 3.15 inches x (W) 15 inches x (D) 14 inches |
| Weight |
4.9 kg / 10.78 lb |
| Mains supply voltage (auto ranging) |
100–120 V ac (±10%) 50–60 Hz 200–240 V ac (±10%) 50–60 Hz |
| Fuse |
250 V, T1.6 A (not user replaceable) |
| Power consumption |
standby < 20 W
maximum continuous 400 W |
| Supported file types |
FLAC, ALAC, WAV, MP3, WMA (except lossless), AIFF,
AAC, OGG |
| Audio sample rates |
7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24 k,
29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k |
| Word depths |
16–24 bits |
| Control protocol |
Compatible with UPnP™ media servers,
UPnP™ AV 1.0 control points |
| |
|
| Back Panel Connectors |
|
| |
|
| Analog audio |
|
| Line inputs (1 to 4) |
RCA phono (Input 4 MM/Line) |
| Aux input (front) |
3.5 mm stereo jack |
| Tape/Zone output |
RCA phono (pre-volume control) |
| Line out (L+R) |
RCA phono (post-volume control) |
| Headphone (front) |
3.5 mm stereo jack (post-volume control) |
| |
|
| Digital audio |
|
| SPDIF In |
RCA phono |
| Optical In |
TOSLINK (JIS F05) |
| SPDIF Out |
RCA phono (pre-volume) |
| Optical Out |
TOSLINK (pre-volume) (JIS F05) |
| Speaker outputs |
4 mm banana/binding post/spade |
| Control |
Ethernet 100Base-T RJ45
RS232 (1 & 3) RJ11
IR Flasher 3.5 mm jack (x2) |
| |
|
| Input Electrical |
|
| Analog line inputs |
Max input voltage 6 V RMS, 8.4 V peak
Input impedance 10 k Ω |
| AUX input |
Max input voltage 3 V RMS, 4.2 V peak
Input impedance 100 k Ω |
| MM Phono input* |
Max input voltage 50 mV RMS, 70 mV peak
Input impedance 47 kO 68 pF
MM Gain +40 dB (x100) @ 1kHz |
| SPDIF digital input |
Max input voltage 3 V peak
Input impedance 75 Ω |
| |
|
| Output Electrical |
|
| Analog line outputs |
Max output voltage 6 V RMS, 8.4 V peak, +15.6 dBv
Output impedance 300 Ω
DC offset voltage < 5 mV |
| DAC output |
Output voltage 0 dBFS = 2 V RMS, + 6 dBv
Sample rate Up-sampled to 358.2 kHz for 44.1/88.2 kHz
Up-sampled to 384 kHz for 48/96 kHz |
| Tape/Zone output |
Max output voltage 6 V RMS, 8.4 V peak, +15.6 dBv
Output impedance 300 Ω
DC offset voltage < 5 mV |
| Headphones output |
Max output voltage 6 V RMS, 8.4 V peak, +15.6 dBv
Output impedance 11 Ω
DC offset voltage < 5 mV |
| SPDIF digital output |
Max output voltage 500 mV peak
Output impedance 75 Ω |
| |
|
| Audio Performance |
|
| Line inputs |
THD+N < 0.002 %
Dynamik range 110 dB
Signal to noise ratio 117 dB
Channel separation > 117 dB
Frequency response 2.5 Hz–120 kHz (-3 dB) |
| Pre-amplifier |
MM RIAA Tracking ±0.2 dB
Gain range - 80 dB to + 20 dB
Gain resolution 1 dB
Unity gain volume 0 dB = vol. 80
Line input scaling 0 dBFS = 2.5 V RMS
Line output scaling 0 dBFS = 1 V RMS |
| Power amplifier |
Power output 90 W RMS per channel into 4 Ω
THD+N < 0.015% (1 kHz, 1 W RMS into 4 Ω)
Dynamik range > 120 dB
Signal to noise ratio > 115 dB
Channel balance < ± 0.2 dB
Channel separation > 75 dB (1 kHz into 4 Ω)
Frequency response 6 Hz–25 kHz (-3 dB into 4 Ω)
Damping factor > 170
Speaker output voltage 28.8 V peak
Gain 28.6 dB (relative to line out)
Load tolerance Unconditionally stable into all loudspeaker loads
Signal level for clipping 755 mV RMS, -2.5 dBv |
| |
|
| * Input 4 configured as MM by default — speak to your Linn specialist to change to line level or upgrade to MC. |
